image logo

QUICKEST - EASIEST - SAFEST

PORTABLE CAR LIFT SOLUTION

Your Choice of Lift Models

quickjack bl3500slx

QuickJack

BL-3500SLX

  • 3500 lb Lift Capacity
  • 62" Frame Length
  • 20" Max. Lift Height
  • 3" Collapsed Height
bl5000xl-portable-car-lift

QuickJack

BL-5000SLX

  • 5000 lb Lift Capacity
  • 70" Frame Length
  • 21" Max. Lift Height
  • 3" Collapsed Height
quickjack bl7000slx

QuickJack

BL-70000SLX

  • 7000 lb Lift Capacity
  • 71" Frame Length
  • 21.5" Max. Lift Height
  • 3.6" Collapsed Height

QUICKJACK Portable Car Lift

Quickjack Portable Car Lift is possibly the best replacement for your floor jack without burning holes in your pockets.
As stated on their website it is the ultimate tool for DIY mechanics and racing enthusiasts looking to do a lot with limited space.

The reason for calling out mechanics and car racers is because Quickjack has clear floor space between the lifts and has a collapsed height of only 3 inches.

QuickJack lifts are 2 piece units, each one is 11 inches wide with wheels at one end, making them easy to handle by anyone and supplying a stable platform for lifting. By not having any cross members, there is almost no vehicle width restrictions.

This clear space allows you to work on items under the car with unimpeded access. (You can drop a drive shaft, exhaust or gearbox)

You could have the lifts from storage and in place ready to lift in under 60 seconds. Another 30 seconds will have your car at full lift.

Just because you are not a mechanic or racer does not mean this won’t be any good for you. Quite on the contrary!
It’s perfect for cleaning vehicles with wheels off, long term storage of a vehicle, prepping and painting and push the lifts together for use as an ATV lift or add the special adapter and use as a motorcycle lift 

quickjack bl3500slx

QUICKJACK BL-3500SLX Portable Car Lift

The QuickJack BL-3500 is the smallest of the QuickJack range and is ideally suited to lifting smaller compact cars.

Wrenching, washing or just tinkering if you love being around and taking care of your car the BL-3500 with it’s 20 inch lift makes many of the tasks you do so much easier.

If you are part of a race team and require a jacking system that is compact and can quickly get all four wheels off the ground at once safely, a QuickJack makes a valuable assist.

Better safety and less effort. The QuickJack BL-3500SLX is a portable light weight car lift. No matter how small (or large) your garage working space is this portable lift system won’t take up any more space than your jack and stands.

With a lowered height of only three inches this portable car lift will slide under all but the lowest of skirts. Vehicle width is of no concern as the Quickjack can be set to suit any vehicle that it is capable of lifting.

The BL-3500SLX has a lift capacity of 3500 lbs (1587kg). Once you get one and do the intial set up (detailed instructions are given for this), after that it’s as easy as slide, connect and power up. All wheels are off the ground. No jacking one end and then the other. You’ll be wondering why you stuck it out with the jack and stands or those pesky ramps for so long.

Lifting Capacity – 3500lbs (1587 kg)
Collapsed Height – 3″ (75mm)
Collapsed Height w/Small Block – 3.5″ (89mm)
Lift Height no blocks – 16.5″ (419mm)
Lift Height small rubber block – 17″ (432mm)
Lift Height tall rubber block – 18.5″ (470mm)
Lift Height stacked blocks – 20″ (508mm)
Frame Width (each) – 10.6″ (268mm)
Lift Blocks Max. Spread – 50.5″ (1283mm)
Lift Blocks Min. Spread – 26.7″ (678mm)
Frame Length – 62″ (1575mm)
Frame Weight (each) – 60 lbs (27kg)
3500lb capacity
Dual-position automatic safety locks
Portable power unit with pendant remote control
Urethane wheels provide effortless rolling
Open-center design for clear under car access
Low-profile jack frames fit under most race cars
Eight piece set of adjustable and stackable rubber lift blocks
Durable powder coat finish
Hydraulic hoses feature quick connect/disconnect fittings
Hydraulic cylinders feature safety valves
Detailed installation, safety and maintenance instructions
Easily stored out of the way when not in use

What You Get With The QuickJack BL-3500SLX Portable Car Lift

  • 2 - Jack Frame Assemblies
  • 2 - 150" Hydraulic Hoses
  • 2 - 14" Auxiliary Hoses
  • 2 - Frame Handles
  • 4 - 1.5" x 3" x 4" Rubber Lift Blocks
  • 4 - 3" x 3" x 4" Rubber Lift Blocks
  • 1 - Mini Hydraulic Power Unit w/RC Pendant
bl5000xl-portable-car-lift

QUICKJACK BL-5000SLX Portable Car Lift

The QuickJack BL-5000SLX sits comfortably between the BL-3500 and the BL-7000. It will easily lift the small city car and won’t hesitate to lift a light truck.

This is the portable car lift that makes those weekends of routine vehicle maintenance a breeze. And perfect for when those unforseen brake repairs need attending to.

Whether you like to wrench or detail, the BL-5000SLX is the ideal portable car lift to make every job easier and safer.

Are you sick of being on your knees with the jack and stands or having the ramps slip as you try to drive on?
The QuickJack BL-5000SLX portable car lift slides easily under and with a push of a button has your car in the air effortlessly.

A collapsed height of three inches means this 5000 lb capacity car lift can get under all but the lowest of cars. Being a two piece lift system it suits any width vehicle within it is maximum lift capacity.

The QuickJack BL-5000SLX may have it’s roots founded in the pits of a race track but it is just at home in the car enthusiasts garage as it is in an automotive shop.
Because it’s portable it fits easily into most trunks or across the back seat (cover the seat first) and can be set up anywhere where the ground is flat and there is a power connection.

SUV adapters can be used with the BL-5000SLX to lift the higher ground clearence vehicles. Adapters sold seperately.

Lifting Capacity – 5000lbs (2268kg)
Collapsed Height – 3″ (76mm)
Collapsed Height w/Small Block- 3.8″ (97mm)
Lift Height no blocks – 17.6″ (447mm)
Lift Height small rubber block – 18.4″ (467mm)
Lift Height tall rubber block – 19.2″ (487mm)
Lift Height stacked blocks – 21.3″ (542mm)
SUV Adapters 20.3″ (516mm)
SUV Adapters +3″ Pin 23.3″ (592mm)
Frame Width (each) – 11″ (278mm)
Lift Blocks Max. Spread – 60″ (1524mm)
Lift Blocks Min. Spread – 29.5″ (749mm)
Frame Length – 70″ (1778mm)
Frame Weight (each) – 76lbs (35kg)
Power Unit Weight 35lbs (16kg)
5000lb capacity
Dual-position automatic safety locks
Portable power unit with pendant remote control
Urethane wheels provide effortless rolling
Open-center design for clear under car access
Low-profile jack frames fit under most race cars
Eight piece set of adjustable and stackable rubber lift blocks
Durable powder coat finish
Hydraulic hoses feature quick connect/disconnect fittings
Hydraulic cylinders feature safety valves
Detailed installation, safety and maintenance instructions
Easily stored out of the way when not in use

What You Get With The QuickJack BL-5000SLX Portable Car Lift

  • 2 - Jack Frame Assemblies
  • 2 - 150" Hydraulic Hoses
  • 2 - 14" Auxiliary Hoses
  • 2 - Frame Handles
  • 4 - 2" x 3" x 4" Rubber Lift Blocks
  • 4 - 3" x 3" x 4" Rubber Lift Blocks
  • 1 - Mini Hydraulic Power Unit w/RC Pendant
quickjack bl7000slx

QUICKJACK BL-7000SLX Portable Car Lift

The QuickJack BL-7000SLX is a heavy duty portable car lift. It will lift most SUV’s and light/medium trucks. Ideally suited to the mobile mechanic, car detailer or 4×4 enthusiast.

Not only does this portable lift lift more it lifts higher. Like all the QuickJacks it has two stage, dual locking arms that engage automatically ensuring safety while the vehicle is raised.

Quality urethane wheels make moving from storage and in to position a simple affair of drag n drop, then connect the hoses, power and lift.


Not everyone is buying in to the compact electric vehicle craze. SUV’s, Four wheel drives and trucks are still the main drive vehicles of many. These vehicles require a lift that can rip them off the ground and hold them there safely. The BL-7000SLX manages this in under a minute.

With a collapsed height of under four inches this portable car lift is lower than most lifts in it’s class. Consisting of two lifting frames makes the QuickJack system easy to store out of the way either on the floor or on the wall.

Concrete garage floor not required. Any flat solid surface is good for the BL-7000SLX, making it perfect for race tracks or the pits area of a 4×4 event. No assembly required, once the intial set up is done, just set in position, connect hoses, plug in power and up she goes.

SUV adapters maybe required for some vehicles. Adapters sold separately.

Lifting Capacity – 7000lbs (3175kg)
Collapsed Height – 3.6″ (91mm)
Collapsed Height w/Small Block- 4″ (102mm)
Lift Height no blocks – 18.2″ (462mm)
Lift Height small rubber block – 18.6″ (471mm)
Lift Height tall rubber block – 19.4″ (493mm)
Lift Height stacked blocks – 21.6″ (548mm)
SUV Adapters 20.7″ (526mm)
SUV Adapters +3″ Pin 23.7″ (602mm)
Frame Width (each) – 12.5″ (318mm)
Frame Length – 71″ (1803mm)
Lift Blocks Max. Spread – 60″ (1524mm)
Lift Blocks Min. Spread – 29.5″ (749mm)
Frame Weight (each) – 96lbs (44kg)
Power Unit Weight 35lbs (16kg)
7000lb capacity
Dual-position automatic safety locks
Portable power unit with pendant remote control
Urethane wheels provide effortless rolling
Open-center design for clear under car access
Low-profile jack frames fit under most race cars
Eight piece set of adjustable and stackable rubber lift blocks
Durable powder coat finish
Hydraulic hoses feature quick connect/disconnect fittings
Hydraulic cylinders feature safety valves
Detailed installation, safety and maintenance instructions
Easily stored out of the way when not in use

What You Get With The QuickJack BL-7000SLX Portable Car Lift

  • 2 - Jack Frame Assemblies
  • 2 - 150" Hydraulic Hoses
  • 2 - 14" Auxiliary Hoses
  • 2 - Frame Handles
  • 4 - 1.5" x 3" x 4" Rubber Lift Blocks
  • 4 - 3" x 3" x 4" Rubber Lift Blocks
  • 1 - Mini Hydraulic Power Unit w/RC Pendant

Accessories

QuickJack-Adapters-Truck

SUV & Light Truck Adapters

  • 4 - Contact Pads
  • 4 - Sliding Receivers
  • 4 - 3" Adapters
  • Extends Lift Range

Motorcycle Lift Adapter

  • Light Weight Aluminium Platform
  • Tie Down Points
  • Adjustable Wheel Clamp
  • Easy Fitment

Urethane Slotted Jack Pads

  • 4 - 3" Dia. x 2" High
  • Protects Pinch Welds
  • Anti-slip Construction
  • Durable Polyurethane

Clicking on the above buttons will take you off this site

Fitstopgarage.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn a commission on purchases made through links to Amazon.com

Copyright © 2019 Fitstopgarage.com | All Rights Reserved